On-line Store
|
NEW!
Protimeter SURVEYMASTER - BLD5360 Dual Mode Pin and
Non-Invasive Moisture Meter
The NEW Surveymaster incorporates two modes of operation
- Search and Measure - that enable the user to distinguish
surface moisture from sub-surface moisture, essential
information when trying to establish the extent and cause
of a moisture problem.
Moisture level values are shown on a digital display along
side a scale of color coded lights that indicate the moisture
condition of the material. This combined presentation of
moisture measurement helps the user to map the extent of
problems and monitor changes in condition precisely and
reliably.
|
|
In the measure mode the meter can be used with:
- A two-pin head-and-lead for awkward corners and under work surfaces.
- A set of Deep Wall Probes that are insulated except for their tips providing quantitative WME readings at depth, regardless of surface moisture and surface contamination by salts.
- An optional Hammer Electrode (BLD5000) for quick and easy measurement at depth of the moisture content of timber.
- The instrument is supplied with pouch, moisture probe, deep wall probes, calibration check device and wood calibration table.
|
NEW!
Tramex MEP Moisture Encounter Plus Detector
The Moisture Encounter PLUS is an upgraded version of the world's
most popular and successful non-destructive moisture meter,
the Moisture Encounter. The Moisture Encounter PLUS incorporates
all the features and benefits found in the original Moisture
Encounter such as:
- Non-destructive moisture measurement of wood, plaster,
drywall, block, brick, roofing and most materials found
in the building envelope using 3 ranges of sensitivity.
- Deep signal penetration to detect elevated moisture
through most covering materials such as Ceramic tile,
Drywall, Carpet, Vinyl Flooring, VCT, Floor Laminates,
Wall Coverings, Roofing Membranes and Coatings without
having to damage or puncture the materials being tested.
- Rubber electrode pads in direct contact with material
being tested for better sensitivity and depth of signal
penetration.
In addition to all the features found in the Moisture Encounter the
New Moisture Encounter PLUS makes moisture measurement and evaluation
faster, accurate and more versatile with the following enhancements:
- Deeper signal penetration up to over 1" into the materials
being tested. Wider range of readings for wood of 5% to 30%
and 0 to 100 comparative for all other materials. Larger
clear easy to read display giving meaningful readings. Hold
Function enables user to "freeze" the reading. Useful for
taking readings when the meter face is not visible.
- Switch-able "On" or "Off" audio warning tone.
- Automatic Power Cutoff switches "Off" when not in use.
- Automatic Default to last user setting when switched back on.
The new Moisture Encounter PLUS incorporates the latest
digital technology with analog read out and ease of use.
|
Delmhorst Instrument Company has over 50 Years of
Quality, Accuracy, and Service.
That's why so many companies rely on Delmhorst resistance technology and
accuracy, proven by university and independent studies. Resistance technology
is the standard around the world. It is the only real way to identify surface
and core moisture content, minimizing defects and improving quality control.
Whether you're a home inspector, claims adjuster, or homeowner, a Delmhorst
moisture meter is the only tool that will tell you the job is done right!
By checking moisture conditions at any stage of a home inspection, water
damage claim, or EIFS job, you will be able to sign off with confidence that
the structure is dry. Our wide assortment of models gives you the opportunity
to select the right meter for your needs.
All Delmhorst meters include these outstanding features:
- Rugged carrying case, batteries and extra contact pins
- Temperature stable circuits - no need to make adjustments before taking a reading
- Built-in battery and calibration checks -
gives you confidence in performance and primary calibration
|
|
ACCUSCAN Multi-Purpose Meter
|
FLOORING
- Minimize the risk of costly problems such as adhesive failure, cupping and splits.
- Identify problem areas in hardwood, resillient, and tile floors.
- Check moisture levels in concrete during the drying process to ensure
that the concrete is ready for floor covering.
WATER RESTORATION/IAQ
- Quickly scan the area upon arrival to determine moisture levels in
damaged and non-damaged areas.
- Reduce drying time by checking moisture every step of the way.
- Record readings during the drying cycle to monitor progress of drying equipment.
- Verify the structure is dry before removing drying equipment.
WOODWORKING
- Ensuring the quality of every project.
- ACCUSCAN is ideal for finished wood products when you prefer not to make
holes with a pin-type meter.
HOME INSPECTORS, EIFS INSPECTORS AND GENERAL CONTRACTORS
- Use as "first alert" to quickly scan and identify problem areas that may
require the accuracy of your pin meter.
FEATURES
- Easy to read analog readout
- Measures %MC in wood over the range of 6% - 40%
- 0-100 color-coded reference scale for non-wood building materials
- 3/4" penetration
- Durable electrode pads . more rugged than competitors' sensor pads
- Built-in battery and calibration checks
- 1 year warranty
- Carrying Case included
- 9-Volt battery included
|
|
J-LITE Wood Moisture Meter
|
- Microcontroller circuit for increased reliability and accuracy
- 12 Bright LEDs -- great for reading in direct sunlight or dark
areas and give the most precise readings of any LED meter available today.
- Moisture content range from 6% - 30%
- Connector for an external electrode.
- Industry only three year warranty
- Our most economical model, the J-Lite is rugged and easy to use.
|
|
BD-2100 Wood & Non-Wood Moisture Meter
|
Truly one of the most versatile moisture meters available today,
the BD-2100 is perfect for the professional home inspector.
- Digital readout with Three scales:
- Wood Scale - 6% to 40% moisture range.
Use for flooring and building material such as wood studs,
floor joists, subfloors
- Reference Scale - reads from of 0 to 100 on a relative basis.
Use on non-wood materials such as concrete, plaster, and insulation
- Gypsum Scale - 0.2% to 6% moisture range. Use on sheetrock.
- One year warranty
The BD series, purchased individually, includes a carrying case and
extra #2497/A-100 contact pins. Or choose from two different packages
depending on your needs.
The standard package includes a moisture meter, carrying case,
#21-E electrode and extra #2497/A-100 contact pins.
The EIFS package includes the moisture meter, carrying case, #21-E with 6"
pins, (2) extra #608/1 contact pins, hole punch to make pilot holes, and
extra #2497/A-100 contact pins.
|
| BD-2100 Accessories |
21-ELECTRODE
4" insulated pins for use on EIFS, roofing and insulation
or any tests where deeper penetration is required.
Required for EIFS inspectors; widely used by roofing contractors,
the 21-E may be purchased as an option or included in one of our
moisture meter packages, depending on model.
|
26-ES
Electrode & contacts pens 1-1/8" penetration for all materials
| |
21-E-001 Handle plus 6" Penetration Insulated Pins
for use with EIFS
| |
608-001 Contact Pins used on 21-E, 6" Penetration, Package of Four (40).
|
|
|
